Advanced Motion Controls Silent Servo Motor
57IV90/57IV130/57IV180 Functions
one.Functioning voltage: DC input voltage 15VDC to 50VDC ,suggest voltage is 36V
two.The max steady output present is 10A, the max peak recent is 22A (three occasions overload ability)
3.Acceptable differential or single-ended pulse / path command, have three control method of place, velocity and torqe
4.Using FOC magnetic place management technological innovation and place vector pulse width modulation (SVPWM) closed-loop manage engineering
5.The quantity of pulses per cycle (subdivision) can be established by the debug software or the dial swap location(electronic equipment ratio)
six.Have three varieties of 90w,130w and 180w DC brushless servo motor to select.
seven.Have safety of overvoltage, undervoltage, overcurrent and tolerance,and many others.
8.Solitary / double pulse manner, the pulse legitimate edge can be choose.
nine.The max pulse frequency of manage instruction is 500KHz (manufacturing unit default is 200KHz)
10.Pulse, path and allow signal input interface amount is four.five to 28V compatible
11.With serial RS232 / RS485 debugging perform, but need to use our special serial debugging cable
12.Functionality: sleek speed, little overshoot ,small monitoring mistake, minimal heat of motor and driver
Driver Model And Selection Xihu (West Lake) Dis.
| Motor Type | 57IV90 | 57IV130 | 57IV180 | |
| Rated power(W) | 90W | 130W | 180W | |
| Vector Maximum Current | 16A | 18A | 22A | |
| Body Length(MM) | 106.2 0.5 | 126.2 0.five | 146.2 0.5 | |
| Operation Voltage | 15-50Vdc,36Vdc recommend | |||
| Overvoltage Protection Voltage | 68Vdc±2 | |||
| Control Method | 32 bits DSP vector FOC control technology | |||
| Pulse Limit Frequency | 500KHz(factory default 200KHz) | |||
| Protection | Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm | |||
| Input Signal | Pulse, direction and enable differential / single-ended interface signal, interface level 4.5-28Vdc compatible, no need external current limiting resistor |
|||
| Output Signal | Alarm / in-position signal OC output, the output capacity is100mA, need external pull-up resistor, the maximum pull up voltage is 24Vdc |
|||
| Electronic Gear Ratio | Default 4000 / rev, through the DIP switch or debug software setting subdivision (two hundred-51200) |
|||
| Position Error Control Accuracy | ±1 Pulse | |||
| Speed Control Accuracy | ±2 rpm | |||
| Maximum Acceleration | 100 rpm/ms | |||
Dialing Swap Options
| Pulse/Rev. | SW1 | SW2 | SW3 | SW4 |
| Default | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| one thousand | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| 10000 | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Subdivision precision (digital gear ratio) :When SW1, SW2, SW3, SW4 are ON, the travel uses the inside default micro-stage subdivision, the default inner subdivision of the driver is 400Pulse / rev, and the electronic equipment ratio can also be established by the debugging software program. SW5 set the motor path,when turnON, the motor turns clockwise (CW),when flip OFF, the motor turns counterclockwise(CCW). SW6 control method selection, whenON, the motor enters the self-examination manner,producing one particular CZPT and reverse revolution, has been recurring till exit self-test mode, the external manage signal is invalid at self examination method, whenOFF, the motor exits self-examination mode,then the external manage sign is valid.
Mechanical Composition Dimension
| Driver mode | Motor body length(mm) | Driver thickness(mm) | Integrated motor driver length(mm) |
| 57IV90 | seventy six | thirty.two | 106.2 |
| 57IV130 | 96 | thirty.2 | 126.2 |
| 57IV180 | 116 | thirty.two | 149.two |
Be aware : All over is usually employed, and we can customize in accordance to your request or decide on the suitable product for you, please inform us following parameters: current, voltage, holding torque, physique length,the software spot.
Software
Suited for all sorts of modest and medium-sized automation equipments and instruments. This kind of as: laser equipment, health-related gear, 3D printer, tiny and medium-sized engraving device, digital processing equipment, computerized crawling products, specific CNC equipment device, packaging gear and robot. It is especially helpful for users who count on low sound and substantial speed programs.
Packaging and delivery
one.Outer packing: CZPT export carton with needed shipping marks
two.Internal packing: Watertight packing with shock absorbing EPE and cardboard surrounded
3.As for each the clients needs
Our services
1.Functioning time : 8:00 a.m – 10:00 p.m .Any queries, please notify us freely, we will be reply you asap.
2.Lead time : For samples, two to five times will be Okay. For mass production, the lead time count on the quantities you need to have.
three.Warrantity time period : eighteen months and Existence-extended routine maintenance provider for the solution.
four.We accept merchandise customize.
FAQ
Q1: How to pick the suitable stepper or servo motor?
A1: There are serveral essential items: dimension, length, keeping torque, voltage, recent and so forth.Soon after affirm them and told us, we can choose the suitable one particular for you.
Q2: Any other methods to finalize the product?
A2: Certain, you can send out us the model you are employing, we can support you uncover the suitable one particular.
Q3:How to assure the High quality of CZPT Elements?
A3: We have the built-in system for industrial components high quality control. We have IQC (incoming quality control), IPQCS (in method high quality manage area), FQC (closing top quality manage) and OQC (out-going quality manage) to management every single process of industrial elements prodution.
This autumn:What is actually the Benefit of Your Components for Business Products?
A4:1.The advantage of our items is the competitive charges, fast supply and higher quality. Our
personnel are liable-oriented, pleasant-oriented,and diligent-oriented. Our merchandise are featured by strict tolerance, sleek end and lengthy provider time.
two.Prior to we send out the merchandise,we examine them more than 3 instances.
Get in touch with
