Servo Motor Management CZPT Bending Testing Device 30kn
1 Application
This testing machines is equipped with personal computer, printer, and standard check software, to give an accurate dedication of metallic the content tensile power, yield toughness, the provisions of non-proportional extension toughness, elongation, elastic modulus mechanical homes. Test final results can print (force – displacement, pressure – deformation, pressure – displacement, anxiety – deformation, power – time distortion – time) 6 types of curves and connected test data, with the software self-take a look at perform that can self-diagnose difficulties. It is best screening gear for the industrial and mining enterprises, scientific analysis units, universities, engineering quality supervision station. They are perfect screening instrument task quality testing section, universities and faculties, research institution and industrial and mining.
2. Check functionality of machine and appropriate CZPT:
ASTM E8 – 16CZPT Take a look at Techniques for Tension Tests of Metallic Supplies
ISO 6892-1 Resources –tensile tests
3. Principal CZPT Parameters:
Product | UTM-30 |
Max. load pressure | 30KN |
Crosshead Journey | 1000mm |
Effective tensile room | 700mm |
Powerful Check width | 450mm |
Crossbeam vacation speed | .001-500mm/min |
Screening Specification | UTM-thirty |
Max.load | 30KN |
Load accuracy | Class 1 (class .five optional) |
Load variety | 1%-one hundred%FS (.4%-100%FS optional) |
Load resolution | one/300000 |
Deformation Measurement Variety | .2%~a hundred%FS |
Deformation precision | ≤±1% (≤±0.five% optional) |
Deformation resolution | 1/500000 |
Load manage velocity | .01~fifty kN/s |
Deformation manage speed | .002~.5mm/s |
Control Specification | UTM-thirty |
Tension rate | .005%~five%FS/s |
Tension fee accuracy selection | When price < 0.05% FS/s, the precision± 2% When charge ≥ .005%FS/s, the precision ±0.five% |
Deformation price | .005%~five%FS/s |
Deformation fee precision assortment | When charge < 0.05% FS/s, the precision± 1% When price ≥ .005%FS/s, the precision ±0.5% |
Displacement manage accuracy | ±0.five% |
Continuous load, deformation and displacement manage | .5%~100%FS |
Continuous load, deformation and displacement management accuracy | Preset value≥10%FN, within the ±0.one% of preset benefit Preset value<10%FN, within the ±1% of preset value |
Clamping Requirements | UTM-thirty |
Tensile grip | Guide Wedge Fixture |
Spherical specimen clamping assortment | Φ4-9mm,9-fourteen, (fourteen-20mm optional) |
Flat specimen clamping variety | -7mm, seven-14, (fourteen-20mm optional) |
Compression Plate | Φ100×100 mm |
Bending fixture | 3 point bending fixture (optional) |
Digital Extensometer for metallic substance | YUU10/50 (optional) |
Massive deformation extensometer for rubber | DBX-800 (optional) |
4. Principal Device Characteristic:
four.one Rigid ground-standing body loading composition with upper space for tensile and decrease 1 for compression and bending examination
4.two Specific ball screws withstand the complete loading with prolonged-life use and compact layout.
4.3 Velocity manage method is established underneath the desk and contains the synchronous toothed belt and pulley for higher-successful transmission, which are showcased with minimal noise and routine maintenance free of charge.
4.four Set crossbeam as higher kinds, and sits above the frame and with center crossbeam as loading beam with sleek vacation when testing . The substantial-precision sensor is installed beneath the crossbeam.
4.five Load computerized withstanding,, anxiety, strain manage, cycle management and self programming.
four.six Higher precision load sensor for ensure accurate and stable measure
four.7 Vast crossbeam travel speed from .05 ~ 500mm / min
4.eight Overload defense: as check power exceeds two%-5% of the optimum test drive of each and every file, overload defense, it will quit.
5. Factors Offer list
Item | Main entire body | Materials |
1 | Higher beam | 1set |
2 | Cross beam | one set |
three | Large precision screw ball | 2 sets |
five | Servo motor | ZheJiang TECO Brand (Japan Panasonic Model optional) |
six | Load sensor | China Brand name (The us Transcell Brand optional) |
seven | .Reducers | ZheJiang Brand |
8 | Synchronous belt | China Brand 1PC |
nine | Computer | Lenovo, 1PC with Lcd display and all new |
10 | Printer | HPA4 coloration ink-jet printer, 1PC |
Product | Clamping | QTY |
1 | Handbook Wedge Tensile fixture (hydraulic automatic clamping fixtures optional) |
1 set |
two | Spherical Jaws Φ4-9mm,nine-14, (14-20mm optional) Flat Jaws: 0-7mm, seven-14, (14-20mm optional) |
1 set |
three | Compression Plate 100x100mm | 1 established |
four | three stage bending fixture (optional) | 1 established |
5 | Digital Extensometer for steel (optional) | one established |
six | Massive deformation extensometer for rubber (optional) | one established |
6. Information Acquisition technique
61. The information acquisition system of device is made up of two substantial precision A/D conversion channel and the optimum resolution should be 1/300000 (bare minimum)
6.2. USB powered data -logger with USB two. and RS- 232 laptop interface, 5-keys joystick, 2MB RAM, Automatic recognition facility, Internal sign generator and 12-bit conversion resolution
seven. Software
7.one Batch and report processing program facility in doc and exl structure
seven.two The computer software is completely compliance with the corresponding worldwide specifications like ISO, ASTM and GB standards