China Horizontal Mounting Speed Reducer Cycloidal Gearbox for Mixing Plant with Great quality

Solution Description

 

Item Description

 Horizontal Mounting pace Reducer Cycloidal Gearbox for mixing plant 

Elements:
one. Housing: Cast Iron
two. Gearset: Cycloid Wheel & Pin Wheel
3. Enter Configurations:
Equipped with Electrical Motors (3 Section AC Motor, Single Phase AC Motor, Brake Motor, Servo Motor)
IEC-normalized Motor Flange
Keyed Sound Shaft Input
4. Output Configurations:
Keyed Solid Shaft Output

Detailed Photos

Features:
one. WB series cycloidal reducers have the same features and attributes with X & B series cycloidal reducers. The distinctions are WB series cycloidal reducers have more compact measurements and power
two. Grease lubrication, oil leak is not possible
3. Several mounting options

Product Parameters

Versions Electrical power Ratio Max. Torque Output Shaft Dia. Input Shaft Dia.
1 Stage
WB65 .04~.12 9~87 25 Φ12 Φ10
WB85 .09~.37 9~87 sixty Φ14 Φ12
WB100 .18~.75 9~87 120 Φ18 Φ14
WB120 .37~1.five nine~87 one hundred eighty Φ30 Φ15
WB150 .fifty five~3. 9~87 250 Φ35 Φ20
2 Stage
WBE1065 .04~.twelve 121~1849 one hundred twenty Φ18 Φ10
WBE1285 .09~.37 121~1849 a hundred and eighty Φ30 Φ12
WBE1510 .eighteen~.seventy five 121~1849 250 Φ35 Φ14

one Phase Ratio: 9, 11, seventeen, 23, 29, 35, 43, fifty nine, seventy one, 87
two Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Installation:
Foot Mounted
Flange Mounted
Lubrication:
Grease Lubrication
Cooling:
All-natural Cooling

 

Packaging & Transport

Organization Profile

Soon after Income Support

Pre-sale providers 1. Choose gear product.
2.Style and manufacture merchandise according to clients’ particular necessity.
three.Train technical personal for clients
Services in the course of marketing 1.Pre-check and accept goods forward of shipping.
2. Support clients to draft fixing strategies.
After-sale services one.Help clients to get ready for the initial design scheme.
2. Practice the initial-line operators.
3.Take initiative to remove the difficulty rapidly.
4. Give specialized exchanging.

FAQ

Our Solutions:FAQ:

one.Q:What types of gearbox can you produce for us?
A:Major items of our business: UDL sequence speed variator,RV collection worm gear reducer, ATA sequence shaft mounted gearbox, X,B series equipment reducer,
P collection planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred versions and thousands of specs
2.Q:Can you make as for each personalized drawing?
A: Yes, we provide personalized services for customers.
3.Q:What is your conditions of payment ?
A: 30% Advance payment by T/T right after signing the agreement.70% prior to supply
4.Q:What is your MOQ?
A: 1 Set

If you have any need for our items please come to feel cost-free to make contact with me. 

US $100-3,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Industry
Function: Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Stepless

###

Customization:

###

Models Power Ratio Max. Torque Output Shaft Dia. Input Shaft Dia.
1 Stage
WB65 0.04~0.12 9~87 25 Φ12 Φ10
WB85 0.09~0.37 9~87 60 Φ14 Φ12
WB100 0.18~0.75 9~87 120 Φ18 Φ14
WB120 0.37~1.5 9~87 180 Φ30 Φ15
WB150 0.55~3.0 9~87 250 Φ35 Φ20
2 Stage
WBE1065 0.04~0.12 121~1849 120 Φ18 Φ10
WBE1285 0.09~0.37 121~1849 180 Φ30 Φ12
WBE1510 0.18~0.75 121~1849 250 Φ35 Φ14

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
US $100-3,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Industry
Function: Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Stepless

###

Customization:

###

Models Power Ratio Max. Torque Output Shaft Dia. Input Shaft Dia.
1 Stage
WB65 0.04~0.12 9~87 25 Φ12 Φ10
WB85 0.09~0.37 9~87 60 Φ14 Φ12
WB100 0.18~0.75 9~87 120 Φ18 Φ14
WB120 0.37~1.5 9~87 180 Φ30 Φ15
WB150 0.55~3.0 9~87 250 Φ35 Φ20
2 Stage
WBE1065 0.04~0.12 121~1849 120 Φ18 Φ10
WBE1285 0.09~0.37 121~1849 180 Φ30 Φ12
WBE1510 0.18~0.75 121~1849 250 Φ35 Φ14

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

Cyclone Gearbox Vs Involute Gearbox

Whether you’re using a cycloidal gearbox or an involute gearbox for your application, there are a few things you should know. This article will highlight some of those things, including: cycloidal gearbox vs involute gearbox, weight, compressive force, precision, and torque density.helical gearbox

Compressive force

Several studies have been carried out to analyze the static characteristics of gears. In this article, the authors investigate the structural and kinematic principles of a cycloidal gearbox. The cycloidal gearbox is a gearbox that uses an eccentric bearing inside a rotating frame. It has no common pinion-gear pair, and is therefore ideal for a high reduction ratio.
The purpose of this paper is to investigate the stress distribution on a cycloidal disc. Various gear profiles are investigated in order to study the load distribution and dynamic effects.
Cycloidal gearboxes are subject to compression and backlash, which require the use of proper ratios for the bearing rate and the TSA. The paper also focuses on the kinematic principles of the reducer. In addition, the authors use standard analysis techniques for the shaft/gear and the cycloidal disc.
The authors previously worked on a rigid body dynamic simulation of a cycloidal reducer. The analysis used a trochoidal profile on the cycloidal disc periphery. The trochoidal profile is obtained from a manufacturing drawing and takes into account the tolerances.
The mesh density in the cycloidal disc captures the exact geometry of the parts. It provides accurate contact stresses.
The cycloidal disc consists of nine lobes, which move by one lobe per rotation of the drive shaft. However, when the disc is rotated around the pins, the cycloidal disc does not move around the center of gravity. Therefore, the cycloidal disc shares torque load with five outer rollers.
A low reduction ratio in a cycloidal gearbox results in a higher induced stress in the cycloidal disc. This is due to the bigger hole designed to reduce the material inside the disc.

Torque density

Several types of magnetic gearboxes have been studied. Some magnetic gearboxes have a higher torque density than others, but they are still not able to compete with the mechanical gearboxes.
A new high torque density cycloidal magnetic gearbox using Halbach rotors has been developed and is being tested. The design was validated by building a CPCyMG prototype. The results showed that the simulated slip torque was comparable to the experimental slip torque. The peak torque measured was a p3 = 14 spatial harmonic, and it corresponds to the active region torque density of 261.4 N*m/L.
This cycloidal gearbox also has a high gear ratio. It has been tested to achieve a peak torque of 147.8 Nm, which is more than double the torque density of the traditional cycloidal gearbox. The design incorporates a ferromagnetic back-support that provides mechanical fabrication support.
This cycloidal gearbox also shows how a small diameter can achieve a high torque density. It is designed with an axial length of 50mm. The radial deflection forces are not serious at this length. The design uses a small air gap to reduce the radial deflection forces, but it is not the only design option.
The trade-off design also has a high volumetric torque density. It has a smaller air gap and a higher mass torque density. It is feasible to make and mechanically strong. The design is also one of the most efficient in its class.
The helical gearing design is a newer technology that brings a higher level of precision to a cycloidal gearbox. It allows a servomotor to handle a heavy load at high cycle rates. It is also useful in applications that require smaller design envelopes.helical gearbox

Weight

Compared to planetary gearboxes, the weight of cycloidal gearboxes is not as significant. However, they do provide some advantages. One of the most significant features is their backlash-free operation, which helps them deliver smooth and precise movement.
In addition, they provide high efficiency, which means that servo motors can run at higher speeds. The best part is that they do not need to be stacked up in order to achieve a high ratio.
Another advantage of cycloidal gearboxes is that they are usually less expensive than planetary gearboxes. This means that they are suitable for the manufacturing industry and robotics. They are also suited for heavy-duty robots that require a robust gearbox.
They also provide a better reduction ratio. Cycloidal gears can achieve reduction ratios from 30:1 to 300:1, which is a huge improvement over planetary gears. However, there are few models available that provide a ratio below 30:1.
Cycloidal gears also offer more resistance to wear, which means that they can last longer than planetary gears. They are also more compact, which helps them achieve high ratios in a smaller space. The design of cycloidal gears also makes them less prone to backlash, which is one of the major shortcomings of planetary gearboxes.
In addition, cycloidal gears can also provide better positioning accuracy. In fact, this is one of the primary reasons for choosing cycloidal gears over planetary gears. This is because the cycloid disc rotates around a bearing independently of the input shaft.
Compared to planetary gearboxes, cycloidal gears are also much shorter. This means that they provide the best positioning accuracy. They are also 50% lighter, meaning that they have a smaller diameter.

Precision

Several experts have studied the cycloidal gearbox in precision reducers. Their research mainly focuses on the mathematical model and the method for precision evaluation of cycloidal gears.
The traditional modification design of cycloidal gears is mainly realized by setting various machining parameters and center position of the grinding wheel. But it has some disadvantages because of unstable meshing accuracy and uncontrollable tooth profile curve shape.
In this study, a new method of modification design of cycloidal gears is proposed. This method is based on the calculation of meshing backlash and pressure angle distribution. It can effectively pre-control the transmission accuracy of cycloid-pin gear. It can also ensure good meshing characteristics.
The proposed method can be applied in the manufacture of rotary vector reducers. It is also applicable in the precision reducer for robots.
The mathematical model for cycloidal gears can be established with the pressure angle a as a dependent variable. It is possible to calculate the pressure angle distribution and the profile pressure angle. It can also be expressed as DL=f(a). It can be applied in the design of precision reducers.
The study also considers the root clearance, the backlash of gear teeth and the profile angle. These factors have a direct effect on the transmission performance of cycloidal gear. It also indicates the higher motion accuracy and the smaller backlash. The modified profile can also reflect the smaller transmission error.
In addition, the proposed method is also based on the calculation of lost motion. It determines the angle of first tooth contacts. This angle is an important factor affecting the modification quality. The transmission error after the second cycloid method is the least.
Finally, a case study on the CZPT RV-35N gear pair is shown to prove the proposed method.helical gearbox

Involute gears vs cycloidal gears

Compared to involute gears, cycloidal gears have a lower noise, less friction, and last longer. However, they are more expensive. Cycloidal gears can be more difficult to manufacture. They may be less suitable for certain applications, including space manipulators and robotic joints.
The most common gear profile is the involute curve of a circle. This curve is formed by the endpoint of an imaginary taut string unwinding from the circle.
Another curve is the epicycloid curve. This curve is formed by the point rigidly attached to the circle rolling over another circle. This curve is difficult to produce and is much more expensive to produce than the involute curve.
The cycloid curve of a circle is also an example of the multi-cursor. This curve is generated by the locus of the point on the circle’s circumference.
The cycloid curve has the same diameter as the involute curve, but is tangentially curving along the circle’s diameter. This curve is also classified as ordinary. It has several other functions. The FE method was used to analyze the strain state of cycloidal speed reducers.
There are many other curves, but the involute curve is the most widely used gear profile. The involute curve of a circle is a spiraling curve traced by the endpoint of an imaginary tautstring.
Involute gears are a lot like a set of Lego blocks. They are a lot of fun to play with. They also have a lot of advantages. For example, they can handle center sifts better than cycloidal gears. They are also much easier to manufacture, so the cost of involute teeth is lower. However, they are obsolete.
Cycloidal gears are also more difficult to manufacture than involute gears. They have a convex surface, which leads to more wear. They also have a simpler shape than involute gears. They also have less teeth. They are used in rotary motions, such as in the rotors of screw compressors.
China Horizontal Mounting Speed Reducer Cycloidal Gearbox for Mixing Plant     with Great quality China Horizontal Mounting Speed Reducer Cycloidal Gearbox for Mixing Plant     with Great quality
editor by czh 2023-01-17