China cycloidal reducer X B series foot mounted cyclo drive gear box iron casting XWD4 B2 cycloid gearbox speed reducer with motor gearbox and motor

Warranty: 2 years, 1-2 Years
Applicable Industries: Machinery Repair Shops, Food & Beverage Factory, Construction works, Energy & Mining
Customized support: OEM, ODM, OBM
Gearing Arrangement: Cycloidal
Output Torque: 2.6-1195N.M
Input Speed: –
Output Speed: 0.16-1571r/min
Color: Customer Requirement
Ratio: 11~87
Mounting Position: Horizontal and Vertical
Output torque: 2.6-1195N.M
Output speed: 0.16-1571r/min
Material: Cast Iron
Certification: CE
Port: ZheJiang /HangZhou

Cycloidal Pin Wheel ReducerCycloidal gear reducer has solid shaft output, hollow shaft output and contract disk hollow shaft output,which can be installed horizontally , vertically. Cycloidal Gearbox is made of high strength quality alloy steel through quenching and possesses high efficiency and long life gear .Othermore,Cycloidal gear reducer can bear large axial and radial load.Features is low in run noise, high in reliability, compact and so on.
Product ApplicationCycloid reducer is a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has many advantages, versatile, and can be both positive and negative operation.Perfect for the machinery and equipment of following industry:- Power Plant Equipment- Metallurgical Industry- Metal Forming Machinery- Petrochemical Industry & Mining Machine- Hoisting Machinery- Construction Industry- Environmental Protection Industry- Cable Industry- Food Machinery Product Feature– Single stage drive with reduction ratio 1:87, high effciency.- Input shaft and ourput shaft are in the same axis, so it’s compact in structure. .- Cycloid gear with high overlap coefficient, steady the machine and lower the noise.- The reducer is made by bearing steel, it’s has a long sevice life.

SizeX1X2X3X4X5X6X7X8X9
B09B0B1B2B3B4B5B6
Output Torque N.M
Speed RatioInput Speed 1500 rpm1000 rpm
112648.3141.7257.6483.0708.3965.91787.02125.1
174074.6149.3398.1746.41094.71492.82761.83284.3
232753.9202.0296.2740.51481.81481.83736.53736.5
293467.9186.7373.5933.71867.41867.42546.54711.3
354182225.4307.4819.61536.72253.83673.45686.5
4350100.7151.0377.6755.21384.51887.92768.93775.8
59207.2380.0759.91381.51899.62590.43799.3
71166.3332.5623.51246.91662.52286.04572.0
87280.1764.01120.52037.22037.27639.5
THICKENING BASEThe box body is made of HT200 material,which is cleaned by professional screening and washing equipment to ensure that the inner cavity of the box body is cleaner without iron filings.
REDUCER SHAFTNew national standard shaft.Multi-precision machining, through strict dynamic and static balance test procedures, to ensure the reducer running low noise, balance smooth. PROFESSIONAL AIR TIGHTNRSS TESTSemi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding MachinePET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Cycloid wheelThe cycloid wheel hardened bearing steel,
high strength, long service life of the rolling friction contact parts adopt.
PRODUCT CHARACTERISTICSHigh Speed Ratio and High Efficiency
Single-stage transmission can achieve a deceleration ratio of 1:87, and the efficiency is over 90%. If multi-stage transmission, the deceleration ratio is larger.
Compact structure and small volume
Because the planetary transmission principle is adopted, the input shaft and the output shaft are on the same axis, so the structure is compact and the volume is small.
Smooth operation and low noise
Cycloidal pin teeth have many meshing teeth, large overlap coefficient and smooth mechanism, which limits vibration and noise to a minimum.
Reliable use and long service life
Because the main parts are bearing steel, high strength is obtained by quenching treatment (HRC58-62), and rolling friction is used in some transmission contacts, which is durable and has long service life.
Products Description CLICK HERE FOR MORE DISCOUNT! BWD Series Cycloidal Gear Speed Reducer with AC MotorBWD0 BWD1 BWD2 BWD3 BWD4 BWD5 BWD6 BWD7XWD0 XWD1 XWD2 XWD3……….BLD0 BLD1 BLD3 BLD4 BLD5 BLD6 BLD7 XLD0 XLD1 XLD2 XLD3……WITH OR WITHOUT MOTOR DEPENDS ON YOUR REQUIREMENTQuick Details:X,B series cycloidal reducer motor planetary transmission principle is an application ,using cycloid meshing , advanced design, novel structure of the reduction gear. This gear has been replaced in most cases 2 , 3 ordinary cylindrical gear reducer and cylindrical worm reducer, in the military , aerospace, metallurgy, mining , petroleum, chemicals, shipbuilding, light industry, food, textile, printing and dyeing , pharmaceutical, rubber, plastics, and lifting transport and other aspects of an increasingly wide range of applications.AdvantagesHigh speed ratio and efficiencySingle stage transmission can reach to 1:87 of speed-down ratio and the efficiency is more than 90%. If use multi-speed drive the speed-down ratio is bigger.CompactBeing adapted epicyclic transmission principle, the input and output shaft are at same axis center, it is compact.Smooth and stable run and low noiseThe cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited at the minimum content. Reliable in operation and long lifeBecause the main parts are made of bearing steel through quenching treatment(HRC58-62), it got high strength. Meanwhile the transmission contact of part adapts rolling friction, so it is durable and long life.Because of reasonable in design, convenient in maintenance, easy to disassemble and assemble, the minimum amount of part and simple lubrication, so it is trusted by customers deeply.
TypeCycloidal-Pin Gear Speed Reducer
Input Speed1400-1500rmp
Output Speed14-280rpm
CertificationISO9001 CE 3C Ex
Power0.18-132KW
For more models, please contact us! Related product Company Profie Exhibition Certifications FAQ Q: Are you trading company or manufacturer ?A: Our group consists in 3 factories and 2 abroad sales corporations.Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the sample for free charge but do not pay the cost of freight.Q: How long is your delivery time ? What is your terms of payment ?A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.Q: What is the exact MOQ or price for your product ?A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.If you have another question, please feel free to contact us. Packing & Delivery

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
gearbox

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China cycloidal reducer X B series foot mounted cyclo drive gear box iron casting XWD4 B2 cycloid gearbox speed reducer with motor     gearbox and motor	China cycloidal reducer X B series foot mounted cyclo drive gear box iron casting XWD4 B2 cycloid gearbox speed reducer with motor     gearbox and motor
editor by czh